Dial
Create a new call by dialing out to a telephone number, a registered sip user, a sip uri, or a Microsoft Teams user.
As the example above illustrates, when you execute the dial command you are making one or more outbound call attempts in an effort to create one new call, which is bridged to a parent call. The target property specifies an array of call destinations that will be attempted simultaneously.
If multiple endpoints are specified in the target array, all targets are outdialed at the same time (e.g., “simring”, or “blast outdial” as some folks call it) and the call will be connected to the first endpoint that answers the call (or, optionally, the first call that completes a call screening application as specified in the confirmHook property).
There are several types of endpoints that you can dial:
- a telephone phone number — this call attempt will be sent out through your configured Carrier,
- a webrtc or sip client that has registered directly with your subdomain,
- a sip endpoint, identified by a sip uri (and possibly authentication parameters), or
- Microsoft Teams user
Parameters
array of up to 10 destinations to simultaneously dial.
The first person (or entity) to answer the call will be connected to the caller, and the rest of the called numbers will be hung up.
webhook to invoke when the call ends. The webhook will include properties describing the outcome of the call attempt.
enable answering machine detection; see answering machine detection for details.
if true, jambonz will not release the media from feature server for the bridged call. See here for details.
Default: false.
If set to true, the inbound call will ring until the number that was dialed answers the call, and at that point a 200 OK will be sent on the inbound leg.
If false, the inbound call will be answered immediately as the outbound call is placed.
Defaults to false.
The inbound caller’s phone number, which is displayed to the number that was dialed.
The caller ID must be a valid E.164 number.
Defaults to caller ID on inbound call.
webhook for an application to run on the callee’s end after the dialed number answers but before the call is connected.
This allows the caller to provide information to the dialed number, giving them the opportunity to decline the call before they answer.
Note that if you want to run different applications on specific destinations, you can specify the ‘url’ property on the nested target object.
url that specifies a .wav or .mp3 audio file of custom audio or ringback to play to the caller while the outbound call is ringing.
an array of strings that represent DTMF sequences which, when detected, will trigger a mid-call notification to the application via the configured dtmfHook.
a webhook to call when a dtmfCapture entry is matched.
This is a notification only — no response is expected, and any desired actions must be carried out via the REST updateCall API.
a nested dub verb to add additional audio tracks into the outbound call.
if true, jambonz will attempt to re-invite itself completely out of the media path for the call; see below for details.
Defaults to false.
an object containing arbitrary SIP headers to apply to the outbound call attempt(s).
a nested listen action, which will cause audio from the call to be streamed to a remote server over a websocket connection.
webhook to invoke when an incoming SIP REFER is received on a dialed call.
If the application wishes to accept and process the REFER, the webhook application should return an HTTP status code 200 with no body, and jambonz will send a SIP 202 Accepted.
Otherwise, any HTTP non-success status will cause jambonz to send a SIP response to the REFER with the same status code.
Note that jambonz will send the 202 Accepted and do nothing further. It is the responsibility of the third-party application to outdial a new call and bridge the other leg, presumably by using the REST API.
See this example app for more details.
max length of call in seconds.
ring no answer timeout, in seconds.
Defaults to 60.
a nested transcribe action, which will cause the call to be transcribed.
target types
phone
Sends the call to a telephone number using one of your provisioned Carriers. The following properties are available:
sip
Sends the call to a sip uri. If the sip trunking provider enforces username/password authentication, supply the credentials in the auth property.
The following properties are available:
user
Sends the call to a registered webrtc or sip user. The following properties are available:
teams
If Microsoft Teams integration has been configured, you can dial out to Teams users. The following properties are available:
The confirmHook property that can be optionally specified as part of the target types is a web callback that will be invoked when the outdial call is answered. That callback should return an application that will run on the outbound call before bridging it to the inbound call. If the application completes with the outbound call still in a stable/connected state, then the two calls will be bridged together.
The confirmHook allows you to easily implement call screening applications (e.g. “You have a call from so-and-so. Press 1 to decline”).
actionHook properties
The actionHook that is invoked when the dial command ends will include the following properties:
amd.hook properties
This webhook that is invoked when amd property is included and jambonz has either determined the type of called party (human or machine) or has detected a tone or beep.
exitMediaPath
The purpose of the exitMediaPath is to support use cases where it is important that the media path not touch the jambonz system at all. The common use case is the need to transfer a call to a human agent or credit card system where the caller will be giving their credit card details over the phone. In order to have a PCI-Compliant transaction it is necessary that this conversation not be able to be recorded, stored, or in any way reach the jambonz system. Performing the dial verb using the exitMediaPath property ensures this happens.
For more details on controlling the media path during a call, please see Controlling media path during call.